news
News

Sanitary Pin Mill Reduces Friable Solids (en)

woensdag 21 december 2011

A new 34 in. (864 mm) sanitary stainless steel Pin Mill model CIM-34-SS from Munson Machinery provides coarse to fine grinding of friable powders, flakes and granules into controlled particle sizes.

High-speed rotation of the inner disc creates centrifugal force that accelerates bulk material entering the central inlet of the opposing stationary disc. As material travels from the center to the periphery of the discs at high speed, it passes through a path of five intermeshing rows of rotating and stationary pins, with the desired tight particle size distribution obtained by controlling the rotor speed.

Setting the infinitely variable rotor speed between several hundred rpm and 5400 rpm provides the flexibility to use the machine for coarse grinding and de-agglomerating as well as for fine grinding down to 400 mesh.

Vertical orientation of the mill housing results in a smaller footprint than horizontally-oriented units, and allows the outer disc to hinge open, providing instant access to all product-contact surfaces for cleaning and inspection.

Also called a "Centrifugal Impact Mill," the unit provides high throughput rates per horsepower relative to machines employing screens, hammers, knives or rolls, depending on application.

Vertical orientation of the Centrifugal Impact Mill housing allows the outer disc to hinge open for rapid cleaning and inspection of all product-contact surfaces.
A new 34 in. (864 mm) sanitary stainless steel Pin Mill model CIM-34-SS from Munson Machinery provides coarse to fine grinding of friable powders, flakes and granules into controlled particle sizes.

High-speed rotation of the inner disc creates centrifugal force that accelerates bulk material entering the central inlet of the opposing stationary disc. As material travels from the center to the periphery of the discs at high speed, it passes through a path of five intermeshing rows of rotating and stationary pins, with the desired tight particle size distribution obtained by controlling the rotor speed.

Setting the infinitely variable rotor speed between several hundred rpm and 5400 rpm provides the flexibility to use the machine for coarse grinding and de-agglomerating as well as for fine grinding down to 400 mesh.

Vertical orientation of the mill housing results in a smaller footprint than horizontally-oriented units, and allows the outer disc to hinge open, providing instant access to all product-contact surfaces for cleaning and inspection.

Also called a "Centrifugal Impact Mill," the unit provides high throughput rates per horsepower relative to machines employing screens, hammers, knives or rolls, depending on application.


link to website