OPTIMUM PLUG ASSIST MATERIAL FOR THERMOFORMING

CGP Europe designs and manufactures high quality, innovative tooling materials used in the thermoforming industry.

What is Optiform® ?


OptiForm® is a plug assist family of materials developed by CGP Europe wich combines the toughness of engineering thermoplastics with the low thermal conductivity of a syntactic foam. OptiForm®  resists chips, dings and breakage that result from even the most abusive production conditions. Our materials performance are far ahead from the old generations of epoxy-based syntactic materials.

OptiForm® highly improves thickness distribution, clarity and reduces mark-off, sticking of difficult to process polymers. In addition, our materials are  DUST-FREE and RECYCLABLE!

The range of product that does not make dust during machining and finishing of plugs !

Benefits


OptiForm® may be used on a wide variety of sheet-fed, rotary or in-line machines. It is widely used with all types of thermoforming film: PP, PET, PLA, HIPS, PVC, PS, PE, multilayers…

With PP & PET we will give better productivity than any other epoxy syntactic.

THINK ENVIRONMENT AND SAFETY FIRST


  • Our products are designed to remove dust from toolmaker workshops. By eliminating dust, we eliminate human risks: no breathing of dust by your teams, no dust on the skin for your operators during machining and finishing of plugs.
  • We also eliminate the risk of dusting all your finished products, your tools, your computers and your electronic devices …
  • We improve the comfort of your operators because they no longer need to wear respirators, gloves and long sleeves against dust.
  • No extractor and / or air treatment is necessary. With OptiForm you will have no worries with safety and health at work. You keep your teams in optimal form!
  • Also think about your planet: OptiForm is RECYCLABLE
Our products are designed to remove dust from toolmaker workshops. By eliminating dust, we eliminate human risks: no breathing of dust by your teams, no dust on the skin for your operators during machining and finishing of plugs. We also eliminate the risk of dusting all your finished products, your tools, your computers and your electronic devices ... We improve the comfort of your operators because they no longer need to wear respirators, gloves and long sleeves against dust. No extractor and / or air treatment is necessary. With optiform you will have no worries with safety and health at work. You keep your teams in optimal form!

WHAT IS PLUG ASSIST ?


Plug assist is used to pre-stretch the heated plastic sheet inside the mold cavity before turning on vacuum during the thermoforming process. The pre-stretching aims at improving the thickness distribution and lots of other parameters (cycle time, mark-off, part clarity, starting gauge…).

Plugs have a geometry usually from 10 to 30% smaller than the mold cavity. They have to be made with low thermal conductivity materials such as syntactic foam otherwise they have to be heated.

The four most important parameters to take into account to get the best results with plug assist is:

  • Select the best material
  • Choose the right design
  • Machining guidelines
  • Make a good finishing surface
Plug assist material by CGP Europe - Innovative material for thermoforming B1X FX2

OPTIFORM F2X

The Standard Grade

For PS, PVC, PET

OPTIFORM SLX

The Smoothest

For PET, PP

OPTIFORM FXT

The Anti Stick with Teflon

For MULTILAYER